Xindak

Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: CA-1 is high fidelity preamplifier with separate double mono channel design inside. Both of the amplifying circuit and power circuit are designed as the left and right channel completely separate with each other, to avoid the interference between left and right channel, and make the sound clearer, with more transparency and detail. CA-1 has reasonable design and excellent layout on the circuit inside. In order to improve timbre, it also adopts Xindak patent technology "Bias Technology...

Features: This cable is suitable to connect the balanced input ports of device to the output ports of device together. BF-Silver, which adopts Cannon connectors, is one of the patent technology - "Coaxial frequency-division Transmission" cables.  It supplies high performance against interferences and high SNR. The core consists of two pieces of 4N Silver foil and two pieces of lacquered twisted OFC wires, then covered with a braiding net which was made of 48 pieces of lacquered twisted OFC...

Features: The basic material for this cables is imported 5N OFC twisted wire, and within each group, there is one piece 0.4mm core wire inside.  There are 24K gold-plated plug or banana optional for users. This cable is an entry level Hifi speaker cable, whose tone color for this cable is neuter with few cleanlily and sweetness.  It is clean on the Middle, and bass is concentrated with satisfactory power, depth and elasticity. Length: 2.5 Meter Other: The length can be made as your...

Features: PF-Cu power cord adopts the patent technology "Coaxial frequency-division transmission", the inside structure just as shown in the cutaway view beside.  The conductor for its Neutral line is the net weaved by 16 pieces OFC with Teflon (polytetrafluoroethylene) cover, which can also shield electromagnetism.  The cooper foil covered by polytetrafluoroethylene and multi-strand OFC lacquered wire twist each other, with one 61 strands OFC wire together composes the conductor for...

Features: This is the power code for connection between the Hifi devices and wall outlet or receptacle. The basis material is the 5N Oxygen Free Copper wire, and with Hospital Grade attaching plug.  Tone color: full, and rich in musical sense on the bass, high-medium e is soft and smooth. Length: 1.5 Meter Quantity: 1 Piece  Other: The length can be made as your requirement Plug: US/EUR.

Features: PN-2 is one of the Soundright "Silver Angle" series cables. Adopt double red and black 0.12mm*36 multi-strand OFC wires covered by PE interwisted together as the core wire.  The red acts as Live line, and the black acts as Neutral line. Otherwise, the ground wire is made up of a φ1mm single silver-gilt wire and the whole amulinum foils covered the core wire.  Because of the character on electromagnetism shield of amulinum foil, the anti-jamming capability for PN-2 is...

Features: This cable is used to connect the audio output ports of the CD player, SACD player, DVD player and VCD player to the input ports of the amplifier. The patent structure -"Coaxial frequency-division transmission" was put to use in this cable. The negative polarity, also as the external conductance of the coaxial structure, is consisted of 48 wires of enameled copper wire, which were twisted together as a braiding net.  It could effectively avoid the electromagnetic disturbance and...

Features: This cable is used to connect the audio output ports of the CD player, SACD player, DVD player and VCD player to the input ports of the amplifier. As the typical interconnect cable of Soundright, SN-1 adopts 5N OFC as basic material which was arranged in parallel in red and white.  It adopts plectonemicly winded Telfon materials as shielding layer.  The whole cable is shaped with high-grade PVC materials and enclosure adopts luxury Ninon net, affording a very soft touch. It...