Xindak HIFI Power Amplifier & DAC

Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: A08 is a dual/mono channel integrated Amplifier. It adopted the 300W linearity power and ICEpower250A amplifying module as the power amplification. ICEpower is a breakthrough of the technology which digital amplification is based on PAM (Pulse Amplitude Modulation) and overcome the shortages of D class amplifiers' sawtooth wave distortion to realize the digital conversion with higher precision and lower distortion. At the same time, to express the advantages of small size, lower heat,...

Features: CA-1 is high fidelity preamplifier with separate double mono channel design inside. Both of the amplifying circuit and power circuit are designed as the left and right channel completely separate with each other, to avoid the interference between left and right channel, and make the sound clearer, with more transparency and detail. CA-1 has reasonable design and excellent layout on the circuit inside. In order to improve timbre, it also adopts Xindak patent technology "Bias Technology...

Features: CS88 is a new integrated tube amplifier with KT88 developed by Xindak recently. Its output power can be 60W for each channel. It can drive loudspeaker easily because of its high output power. Specifications: S/N Ratio: ≥89dB THD: ≤0.25% (1kHz/2V) Output Impedance: 4Ω, 8Ω Number of Channels: 2 Frequency Response: 10Hz~30KHz Input: 1 group RCA Rated Output Power: 60W(CS88)/ 32W(CS34) Net Weight: 27.5Kg Weight: 30Kg Dimensions (W*H*D): 344mm*242mm*483mm

Features: DAC-5 is a new D/A converter of Xindak with excellent upgrading performance. In order to improve the sound quality, Xindak engineers have also used patent technology on avoiding dynamic invalidation of capacitors, which could decrease the distortion on the High especially. It can upgrade the digital signal recorded in PCM format of common CD player to 24Bit/192Khz to achieve higher processing precision and highly improve the dynamics and treble extension, making the sound more mellow...

the price is for one pair Features: MS-3 adopts KT88(6550) tubes which are especially for audio amplify as amplify tubes. The preliminary amplifier stage adopts a 12AX7(ECC83) tube. In addition, a 12AT7 tube composes of a long-tail phase-reversal push-pull circuit. The following stage adopts two KT88/6550 tubes for power amplifying, which are especially for audio amplifiers. The output transformer is high quality EI type with wider frequency response. The power supply part adopts 280W high...

Features: MT-2 is an integrated amplifier adopts tube amplifying and also can use as headphone amplifier. The units appearance is very exquisite and small, which width is only 26cm. The circuit adopts 6P1 vacuum tube as its amplifying tube which form pre-amplifying and drive with 6J1 tube. Adopts Xindak E type special made broadband output transformer, about power supply, it’s adopts 85w high reliability E type power transformer. Besides providing 6.35mm headphone output Jack,it also have USB...

Features: The new PA-1 Stereo power amplifier is upgraded on the PA-1 mono block amplifier, the peak output power can reach 200W per channel. It adopts the independent dual mono circuit design, using two high-power toroidal transformer and rectifier filter circuit to separately supply power for each channel, the voltage amplifier circuit also using the special Xindak manufactured large capacity inductance module to do the auxiliary power filtering, which can significantly improve the purity of...

Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...