Xindak Усилитель мощности HIFI и ЦАП

Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: A08 is a dual/mono channel integrated Amplifier. It adopted the 300W linearity power and ICEpower250A amplifying module as the power amplification. ICEpower is a breakthrough of the technology which digital amplification is based on PAM (Pulse Amplitude Modulation) and overcome the shortages of D class amplifiers' sawtooth wave distortion to realize the digital conversion with higher precision and lower distortion. At the same time, to express the advantages of small size, lower heat,...

Features: CS88 is a new integrated tube amplifier with KT88 developed by Xindak recently. Its output power can be 60W for each channel. It can drive loudspeaker easily because of its high output power. Specifications: S/N Ratio: ≥89dB THD: ≤0.25% (1kHz/2V) Output Impedance: 4Ω, 8Ω Number of Channels: 2 Frequency Response: 10Hz~30KHz Input: 1 group RCA Rated Output Power: 60W(CS88)/ 32W(CS34) Net Weight: 27.5Kg Weight: 30Kg Dimensions (W*H*D): 344mm*242mm*483mm

Features: DAC-5 is a new D/A converter of Xindak with excellent upgrading performance. In order to improve the sound quality, Xindak engineers have also used patent technology on avoiding dynamic invalidation of capacitors, which could decrease the distortion on the High especially. It can upgrade the digital signal recorded in PCM format of common CD player to 24Bit/192Khz to achieve higher processing precision and highly improve the dynamics and treble extension, making the sound more mellow...

the price is for one pair Features: MS-3 adopts KT88(6550) tubes which are especially for audio amplify as amplify tubes. The preliminary amplifier stage adopts a 12AX7(ECC83) tube. In addition, a 12AT7 tube composes of a long-tail phase-reversal push-pull circuit. The following stage adopts two KT88/6550 tubes for power amplifying, which are especially for audio amplifiers. The output transformer is high quality EI type with wider frequency response. The power supply part adopts 280W high...

Features: MT-2 is an integrated amplifier adopts tube amplifying and also can use as headphone amplifier. The units appearance is very exquisite and small, which width is only 26cm. The circuit adopts 6P1 vacuum tube as its amplifying tube which form pre-amplifying and drive with 6J1 tube. Adopts Xindak E type special made broadband output transformer, about power supply, it’s adopts 85w high reliability E type power transformer. Besides providing 6.35mm headphone output Jack,it also have USB...

Features: The new PA-1 Stereo power amplifier is upgraded on the PA-1 mono block amplifier, the peak output power can reach 200W per channel. It adopts the independent dual mono circuit design, using two high-power toroidal transformer and rectifier filter circuit to separately supply power for each channel, the voltage amplifier circuit also using the special Xindak manufactured large capacity inductance module to do the auxiliary power filtering, which can significantly improve the purity of...

Features: 1.Adopt 12AX7(ECC83)*2, 6N8P(6SN7)*2 and KT88(6550)*4 Tubes to compose standard integrated amplifier; 2.Separate power supply to pre-amplifier stage and power amplifier stage; 3.Remote control available for all functions. Specifications: S/N Ratio: ≥89dB THD: ≤0.2% Number of Channels: 2 Tubes: 12AX7(ECC83)*2, 6N8P(6SN7)*2, KT88(6550)*4 Input Sensitivity: 390mV Frequency Response: 10Hz~70KHz (-1dB) Rated Output Power: 50W(8Ω) Remote Control: Supported Net Weight: 24Kg Weight: 27Kg...

Features: XA6200 (08) is hybrid integrated amplifier with tube pre-stage and transistor back-stage to endow it with advantages of both tube amplifier and transistor amplifier. So the performance of this amplifier is not only satisfactory music feeling but also ideal acoustics. The pre-amplifier stage adopts famous ECC88 (6922) which is good at linearity, low distortion, high solution and transparent timbre. Power transistors are two pair of A1943/C5200 in parallel connection to insure enough...