Xindak HIFI 전력 증폭기 및 DAC

Features: CA-5 is based on 20th Anniversary pre-amplifier CA for improvement, we recommend it use of A600P pure class A power amplifier. 1. Dual mono design 2. Wide band audio input transformer 3. 3 Pcs low noise power transformers 4. 2mm gold-plate PCB 5. Remote control Specifications: S/N Ratio: ≥100dB THD: ≤0.02% Number of Channels: 2 Output: 1*RCA, 1*XLR Frequency Response: 10Hz—80KHz (±1.5dB) Input: 3*RCA, 1*XLR Remote Control: Supported Net Weight: 13Kg Dimensions (W*H*D):...

Features: The Xindak XA6800R (II) adopts a new look and internals. It is a pure integrated amplifier designed with high standards in mind for our customers to enjoy their preferred music. Derived from the XA6800R, internals are made of carefully selected components with both objectives to improve sound performance and reliability. Operating as a pure class A amplifier, good heat dissipation is ensured through the design of copper heat conduction bridges on both sides of the amplifier. Not only...

Features: This unit adopts dual differential complementary symmetrical pushpull amplifying. FET (field effect transistor) is put to good use for the track amplifier while the following stage adopts symmetric current negative feedback circuit with wide frequency response range and low distortion. For each channel, there are two stages for impulse, with four pairs of well-selected high-quality HI-FI high-power geminate transistors as field effect tube output with wide dynamic range and strong...

Features: XA8550 power amplifier is designed especially for matching with XA3200MKII pre-amplifier. It is with high fidelity for reproduction the music signal. The appearance is both simple and elegant. The inner circuit design derives from reputable current negative feedback circuit of XA6950 and adopts Darlington structure on the current amplifier stage. The output power dynatrons are three pairs SANKEN 2SC3264/2SA1295 whose peak current can reach 51A, to insure the driving power. The filter...

Features: XA8800MNu is a mono power amplifier, with full symmetric current negative feedback structure. This model offers the user quality sound reproduction and elegant styling also features excellent look. The amplifying circuitry design follows the well appraised current negative feedback structure, featuring the full symmetric and full complementary circuit. The most outstanding advantages of this circuitry are powerful drive, low distortion, rich dynamics, excellent controlling ability,...

Features: It has a basic structure of four-layered 5N monocrystal oxygen-free (OCC) foil ribbon with a width of 18mm and a thickness of 0.125mm.  It has two poles—positive and negative. The two inner ribbons, plated with an alloy of silver and tin, are incorporated into one piece as the positive pole,  and its surface is wound with two-layered isolating medium of polytetrafluoroethylene or polypropylene, which has an ideal dielectric constant, so as to isolate negative...

Features: This cable is suitable to connect the balanced input ports of device to the output ports of device together. BF-Silver, which adopts Cannon connectors, is one of the patent technology - "Coaxial frequency-division Transmission" cables.  It supplies high performance against interferences and high SNR. The core consists of two pieces of 4N Silver foil and two pieces of lacquered twisted OFC wires, then covered with a braiding net which was made of 48 pieces of lacquered twisted OFC...

Features: The basic material for this cables is imported 5N OFC twisted wire, and within each group, there is one piece 0.4mm core wire inside.  There are 24K gold-plated plug or banana optional for users. This cable is an entry level Hifi speaker cable, whose tone color for this cable is neuter with few cleanlily and sweetness.  It is clean on the Middle, and bass is concentrated with satisfactory power, depth and elasticity. Length: 2.5 Meter Other: The length can be made as your...

Features: PF-Cu power cord adopts the patent technology "Coaxial frequency-division transmission", the inside structure just as shown in the cutaway view beside.  The conductor for its Neutral line is the net weaved by 16 pieces OFC with Teflon (polytetrafluoroethylene) cover, which can also shield electromagnetism.  The cooper foil covered by polytetrafluoroethylene and multi-strand OFC lacquered wire twist each other, with one 61 strands OFC wire together composes the conductor for...

Features: This is the power code for connection between the Hifi devices and wall outlet or receptacle. The basis material is the 5N Oxygen Free Copper wire, and with Hospital Grade attaching plug.  Tone color: full, and rich in musical sense on the bass, high-medium e is soft and smooth. Length: 1.5 Meter Quantity: 1 Piece  Other: The length can be made as your requirement Plug: US/EUR.