Xindak HIFI 전력 증폭기 및 DAC

Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: A08 is a dual/mono channel integrated Amplifier. It adopted the 300W linearity power and ICEpower250A amplifying module as the power amplification. ICEpower is a breakthrough of the technology which digital amplification is based on PAM (Pulse Amplitude Modulation) and overcome the shortages of D class amplifiers' sawtooth wave distortion to realize the digital conversion with higher precision and lower distortion. At the same time, to express the advantages of small size, lower heat,...

Features: CA-1 is high fidelity preamplifier with separate double mono channel design inside. Both of the amplifying circuit and power circuit are designed as the left and right channel completely separate with each other, to avoid the interference between left and right channel, and make the sound clearer, with more transparency and detail. CA-1 has reasonable design and excellent layout on the circuit inside. In order to improve timbre, it also adopts Xindak patent technology "Bias Technology...

Features: D2 is a HI-FI D/A Converter of Xindak which included two version: vacuum tube output and transistor output with digital coaxial, optic, USB input. It adopts Wolfson AudioPlus Pure Sound ultimate WM8714 as decode chip. Realize the full-module match in interior, and match with different method according to listening hobby personally. Output circuit of transistor version adopts low-noise and non-inductive resistance and BB company’s OPA2604 operational amplifier. Also it can plug...

Features: H1 headphone amplifier is specially designed for Hi-Fi & PC system. If you use USB cable connect the unit to your PC USB connector, it's could make your PC become part of Hi-Fi system, and through it you could enjoy kinds of high-quality music in your PC. 1.Class A power amplifier circuit, high SNR and low distortion. 2.Built-in high performance USB DAC (PCM2704). 3.Standard-B type of USB connector. 4.Two 6.35mm headphone jacks. Specifications: Input Impedance: 47K Output: RCA*1,...

Features: MT-1 08 Hifi integrated tube amplifier, adopts audio grade Shuguang brand tube EL84 for voltage amplifying, and the preamplifier stage adopts Shuguang tube 12AX7 and 12AU7 for long-tailed phase inversion and driving. ALPS volume potentiometer is adopted for volume control, and high quality relay is adopted for switching the input single. The output transformer is EI mode with wide frequency response. The main transformer is 165W high reliable annular transformer with excellent quality...

Features: LP-1 is a preamplifier for phono special. The power supply and signal processing are designed complete separate with each other. It adopts classic Matisse standard circuit, and support MM. There are 4 tubes inside in total. It adopts two-stage common-cathode amplifier and cathode follower, sets RIAA circuit connected in series. In addition, it especial adopts Xindak patent technology 'Bias Technology for Avoiding the Dynamic Invalidation of Capacitor'. The sound performance is...

Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...

Features: 1.Adopt 12AX7(ECC83)*2, 6N8P(6SN7)*2 and KT88(6550)*4 Tubes to compose standard integrated amplifier; 2.Separate power supply to pre-amplifier stage and power amplifier stage; 3.Remote control available for all functions. Specifications: S/N Ratio: ≥89dB THD: ≤0.2% Number of Channels: 2 Tubes: 12AX7(ECC83)*2, 6N8P(6SN7)*2, KT88(6550)*4 Input Sensitivity: 390mV Frequency Response: 10Hz~70KHz (-1dB) Rated Output Power: 50W(8Ω) Remote Control: Supported Net Weight: 24Kg Weight: 27Kg...