Psvane 진공관 전자 밸브

Description：  Heater  Uf………………2.5V  If…………… 2.5A  Static Parameter  Ua……………………250V  -Ug………………… -45V  Ia……………………60mA  Gm……………………5.25 mA/V ...

The beam power quadrupole KT88 has an anode ultimate power dissipation of 42W. In the audio amplifier, two tubes can achieve 100W power for the AB1 push-pull output, and KT88 can also be used in the electronic voltage regulator circuit. KT88 is similar to CV5220 and 6550 and can be used interchangeably. Hot wire heating UH............ 6.3 V IH............ 1.6 A Limit rating ------------- --KT94 KT100 KT94 KT100 Anode voltage.................. 800 800 800 800 V Second gate voltage......... 600...

Psvane HIFI Series UK-KT88 /UK-EL34/UK-6SN7 are new-creation, never have the better cost-effective in the history of Psvane. After almost one year time, these HIFI UK Series vacuum tubes were come out by development team of Psvane The three model tubes are adopt the most UK sound charms of” Mould screen” plate material, and join into the symbolic music and the extremely emotional appeal sound performance of Psvane.this will be most music you hear with the same price of vacuum tubes.

845B is directly heated triode thorium-tungsten cathode, can be used for A1, AB1 class power amplifier. Filament heating U f: 10 V If: 3.25 A Limit Ratings Anode voltage: 1250 V Anode dissipation power: 75 W Maximum signal output power: 150 W Maximum anode current: 120 mA Electrode capacitance Input capacitance: 6 PF The output capacitor: 4.5 PF Cross-Road capacitors: 14.5 PF Static parameters Ua: 1250 V -Ug: 200 V Ia: 80 mA Gm: 3 mA / V ri: 1.7 KΩ u: -5 RL: 3.4 KΩ Ug (pk): --69 V...

1, PSVANE T-Collection series MK II use the Carbon Microcrystalline technology. Carbon Microcrystalline is a kind of very stable absorbent (material), and it has excellent heat transfer performance. Carbon Microcrystalline make up stabilization of the electrical performance inside of the Vacuum tube.  2, The PSVANE T-Collection series MK II tube socket is made with Teflon. It is very low electric inductivity, very low dielectric loss, and high breakdown voltage, high electric volume...

2A3C Directly heated cathode power dual triode for A1, AB1 class amplification. Filament heating Uf: 2.5 V If: 2.5 A Limit Ratings Anode voltage: 300 V Anode dissipation power: 15 W Gate resistance Since the bias voltage: 0.5 MΩ Fixed bias: 0.05 MΩ Electrode capacitance Input capacitance: 7.5 PF Output capacitance: 16.5 PF Cross-Road capacitors: 5.5 PF Static parameters Ua: 300 V -Ug: 45 V Ia: 60 mA Gm: 5.25 mA / V ri: 0.8 kΩ μ: 4.2 Pout: 3.5 W Class A1 single-tube...

PSVANE 805A hifi Audio Vacuum Tube a pair amplifier tube 100% Brand NEW The price is for 1 pair (2 pcs), if you buy 2 pair(4 pcs), we will send the Factory full matched tubes to you. 1, PSVANE T-Collection series MK II use the Carbon Microcrystalline technology. Carbon Microcrystalline is a kind of very stable absorbent (material), and it has excellent heat transfer performance. Carbon Microcrystalline make up stabilization of the electrical performance inside of the Vacuum tube. 2, The PSVANE...

These are the latest release from Psvane Audio as their affordable series for everyone.  It has dual triode section as a direct heating tube. Compared to the dry sounding Russian tubes, these tubes offer you incredible details at a small price tag. It also provides better low frequency control than generic Chinese 2A3B tubes.  Note: Chinese 2A3C tubes are not exactly the same as 2A3 or 2A3B tubes in terms of structure or specification. This Psvane HiFi series 2A3 can directly replace...

The major difference seems to be that the Psvane is far more extended at the frequency extremes,but at the same time has a far more richer harmonic presentation. Much like the qualities of NOS 845′s  In comparison to the others, the 845T, right out of the box, seems brighter. After about 10 hours I began to notice a difference. Compared to the 845B, they seem far more transparent but at the same time much cleaner. Bass tones and pitch definition are improved. String tone seems to be...

211 is directly heated triode thorium-tungsten cathode, can be used for A, B, C class power amplifier. Filament heating Uf: 10 V If: -3.25 A Electrode capacitance Input capacitance: 6 PF The output capacitor: 5.5 PF Cross-Road capacitors: 14.5 PF Static parameters Ua: 1250 V -Ug: --70 V Ia: 100 mA Gm: 3.8 mA / V u (when Ia = 75mA when): 12 RL: 7 KΩ Pout: 10 W Recommended work status (reference value) Class A single-tube amplification (A-F): Typical operating conditions limit parameters...