Bada SF1.3 HIFI amplificateur de puissance combiné double canal HIFI amplificateur à transistor haute fidélité
Product Warranty
All items Guaranteed 100% Brand New In the original edition Box and Come from the original factory.
All items ONE-YEAR WARRANTY !!!
All items ONE-YEAR WARRANTY !!!
Shipping Time & Invoice Declare
All items ship with DHL/UPS/TNT/EMS, (DHL/UPS/TNT) About 3-7days delivery time, EMS About 7-15days delivery time.
We can Declare the Value of the Order as Customer's Remark!!!
We can Declare the Value of the Order as Customer's Remark!!!
Product Declaration
The Shangfei SF-1.3 audio power amplifier can be said to be the brainchild of Shangfei designers and many enthusiasts. The amplification circuit has unique craftsmanship, which is different from the design of traditional fever power amplifiers; The sound overcomes both the "hard" of transistor machines and the "soft" of electronic tube machines, making it a unique amplifier with a unique charm.
The signal input is controlled by a lossless relay, the volume is controlled by a Japanese ALPS motor potentiometer, and the 40000 UF large pool and high-power ring transformer provide continuous energy, making the low-frequency full, powerful and elastic. We also use a variety of heating components and single crystal copper wire for sound calibration.
The signal input is controlled by a lossless relay, the volume is controlled by a Japanese ALPS motor potentiometer, and the 40000 UF large pool and high-power ring transformer provide continuous energy, making the low-frequency full, powerful and elastic. We also use a variety of heating components and single crystal copper wire for sound calibration.
Function Description
Power switch, press to turn on the power (indicator light on), and pop up the power off (indicator light off) sound source selection knob: Rotate left or right to select different sound source inputs
Remote reception window
Indicator light: This light will flash for about 1 minute when the machine is first turned on, and it will light up when the machine enters normal operating mode. When pressing mute, this light flashes, and when unmute, this light stops flashing.
Volume knob: Rotate the volume knob to the right to increase the volume, and to the left to decrease the volume (please turn the volume knob to the far left before turning it on or off, otherwise it may damage the equipment). Sound source selection indicator light: When this light is on, it indicates that the input of this gear is currently applicable. When the machine malfunctions, this light flashes and stops flashing after troubleshooting
Level indicator: When there is a signal input, the needle will swing with the size of the music. (This level indicator is only for decorative purposes and cannot be used for accurate readings)
Function Description
Audio input socket: Various audio sources such as CDs, DVDs, etc. can be input from this socket (please distinguish between R and L channel wiring, otherwise the sound field will be misaligned)
RCE (recording output) for recording purposes
Right channel speaker terminal (do not reverse the positive and negative terminals of the speaker, and the two terminals must not be short circuited)
Left channel speaker terminal (do not reverse the positive and negative terminals of the speaker, and the two terminals must not be short circuited)
Fuse holder: There is a backup fuse inside the box. When replacing, the 220V power supply must be unplugged and a fuse of the same capacity must be replaced.
technical parameter
Rated voltage: 220V~50Hz ± 10%
Output power: 50W+50W (8om)
Signal to noise ratio:>90dB (A-weighted)
Distortion: ≤ 0.1% 1kHz 30W
Frequency response: 50Hz -18kHz (3dB)
Machine size: 43cm * 39cm * 13cm (width * depth * height)
Overall weight: 11.5kg
