Xindak Amplificador de potencia de alta fidelidad y DAC

Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...

Features: 1.Adopt 12AX7(ECC83)*2, 6N8P(6SN7)*2 and KT88(6550)*4 Tubes to compose standard integrated amplifier; 2.Separate power supply to pre-amplifier stage and power amplifier stage; 3.Remote control available for all functions. Specifications: S/N Ratio: ≥89dB THD: ≤0.2% Number of Channels: 2 Tubes: 12AX7(ECC83)*2, 6N8P(6SN7)*2, KT88(6550)*4 Input Sensitivity: 390mV Frequency Response: 10Hz~70KHz (-1dB) Rated Output Power: 50W(8Ω) Remote Control: Supported Net Weight: 24Kg Weight: 27Kg...

Features: CA-5 is based on 20th Anniversary pre-amplifier CA for improvement, we recommend it use of A600P pure class A power amplifier. 1. Dual mono design 2. Wide band audio input transformer 3. 3 Pcs low noise power transformers 4. 2mm gold-plate PCB 5. Remote control Specifications: S/N Ratio: ≥100dB THD: ≤0.02% Number of Channels: 2 Output: 1*RCA, 1*XLR Frequency Response: 10Hz—80KHz (±1.5dB) Input: 3*RCA, 1*XLR Remote Control: Supported Net Weight: 13Kg Dimensions (W*H*D):...

Features: The Xindak XA6800R (II) adopts a new look and internals. It is a pure integrated amplifier designed with high standards in mind for our customers to enjoy their preferred music. Derived from the XA6800R, internals are made of carefully selected components with both objectives to improve sound performance and reliability. Operating as a pure class A amplifier, good heat dissipation is ensured through the design of copper heat conduction bridges on both sides of the amplifier. Not only...

Features: This unit adopts dual differential complementary symmetrical pushpull amplifying. FET (field effect transistor) is put to good use for the track amplifier while the following stage adopts symmetric current negative feedback circuit with wide frequency response range and low distortion. For each channel, there are two stages for impulse, with four pairs of well-selected high-quality HI-FI high-power geminate transistors as field effect tube output with wide dynamic range and strong...

Features: CFA-1 Interconnect Cable, Xindak latest products, adopts the mixture of special carbon fiber and metal conductance as the structure.  As the positive polarity, the carbon fiber conductance is composed of four strands of wires, and each strand contains 6000 pieces of high purity and high saturation 6μm diameter carbon fibers.  The negative polarity and which also functions as the electromagnetism shielding layer, is consisted of four strands.  Each strand contains 19...

1.This line is used for high-fidelity audio signal connections from CDs, SACD players, and analog VCRs with balanced output ports to amplifiers and recorders with balanced input ports. 2.BF-3 is a balanced version of the Cinderella series audio signal cable with a card plug, which has the advantages of strong anti-interference and high signal-to-noise ratio. 3.This line is a standard double-core symmetrical structure, which is covered with fine cotton yarn and has the effect of shock absorber...

Features: The "Coaxial frequency-division transmission" patent structure. The negative polarity, also as the external conductance of the coaxial structure, is consisted of pieces of multi-strands OFC by white PVC materials and twisted together as a braiding net.  It could effectively avoid the electromagnetic interferences and ensure the high purity of the signal.  The positive polarity, also as the internal conductance of the coaxial structure, is consisted of three parts: the...

Features: LN-3 has two groups of wires arranged in parallel as its internal structure, each group is consisted of three twisted 1.0mmΦ8N copper wires and covered by PVC insulating materials. The terminals are US CMC high grade gilt connectors. Although this cable’s structure is simple, thanks to the high grade materials, its sound is unexpectedly good, with rich musicality, dynamics, excellent balance in whole frequency, making it second to none in LN series cables. Length: 2.5 Meter...

Features: PF-Gold power cord adopts the patent technology "Coaxial frequency-division transmission", the inside structure just as shown in the cutaway view beside.  The conductor for its Neutral line is the net weaved by 16 pieces OFC with Teflon (polytetrafluoroethylene) cover, which can also shield electromagnetism.  The gold-silvery alloy with polytetrafluoroethylene cover and multi-strand OFC lacquered wire twist together, with one 61 strands OFC wire composes the conductor for...